Unhighlight Highlight
281. Progress in advanced manufacturing technologies   Publication: Durnten-Zurich, Switzerland : Trans Tech Publications Ltd., 2012 . 1 online resource : Date:2012 Availability: No items available: Actions: Add to cart
282. Advanced materials for applied science and technology II   Publication: Zurich-Durnten : Trans Tech, 2012 . 1 online resource (112 pages) : Date:2012 Availability: No items available: Actions: Add to cart
283. Advances in manufacturing and materials engineering   Publication: Durnten-Zurich, Switzerland ; | Enfield, NH : Trans Tech Publications, 2012 . 1 online resource (792 pages) : Date:2012 Availability: No items available: Actions: Add to cart No cover image available No cover image available
284. Frontiers of materials, chemical and metallurgical technologies   Publication: Durnten-Zurich, Switzerland ; | Enfield, NH : Trans Tech Publications, 2012 . 1 online resource (2 volumes) : Date:2012 Availability: No items available: Actions: Add to cart No cover image available No cover image available
285. Energy material, chemical engineering and mining engineering   Publication: Durnten-Zurich : Trans Tech Publications, 2012 . 1 online resource (ix, 194 pages) : Date:2012 Availability: No items available: Actions: Add to cart
286. Advances in design technology   Publication: Durnten-Zurich : Trans Tech, 2012 . 1 online resource (1347 p.) : Date:2012 Availability: No items available: Actions: Add to cart
287. Advanced materials and process technology   Publication: Durnten-Zurich : Trans Tech, 2012 . 1 online resource : Date:2012 Availability: No items available: Actions: Add to cart
288. Advances in manufacturing technology   Publication: Durnten-Zurich : Trans Tech, 2012 . 1 online resource (xli, 3105 p.) : Date:2012 Availability: No items available: Actions: Add to cart
289. Advanced research on energy materials and material application   Publication: Durnten-Zurich : Trans Tech Publications, 2012 . 1 online resource (x, 224 pages) : Date:2012 Availability: No items available: Actions: Add to cart
290. Civil Engineering and Materials   Publication: Dumten-Zurich, Switzerland : Trans Tech Publications, 2012 . 1 online resource (154 pages) : Date:2012 Availability: No items available: Actions: Add to cart No cover image available No cover image available
291. Recent trends in advanced materials   Publication: Durnten-Zurich, Switzerland : Trans Tech Publications Ltd., 2012 . 1 online resource (xvi, 569 pages) : Date:2012 Availability: No items available: Actions: Add to cart
292. Advanced composite materials and manufacturing engineering   Publication: Durnten-Zurich, Switzerland ; | Enfield, NH : Trans Tech Publications, 2012 . 1 online resource (407 pages) : Date:2012 Availability: No items available: Actions: Add to cart
293. Advanced materials and information technology processing II   Publication: Durnten-Zurich : Trans Tech, 2012 . 1 online resource (xi, 445 pages) : Date:2012 Availability: No items available: Actions: Add to cart
294. Advances in materials and processing - challenges and opportunities   Publication: Durnten-Zurich : Trans Tech, 2012 . 1 online resource (xiv, 604 pages) : Date:2012 Availability: No items available: Actions: Add to cart
295. Mechatronic Systems and Materials Application   Publication: Durnten-Zurich, Switzerland : Trans Tech, 2012 . 1 online resource (571 pages) : Date:2012 Availability: No items available: Actions: Add to cart No cover image available No cover image available
296. Advanced research on environmental science and material application   Publication: Durnten-Zurich : Trans Tech Publications, 2012 . 1 online resource (xii, 284 pages) : Date:2012 Availability: No items available: Actions: Add to cart
297. Advanced nondestructive evaluation II.   Publication: Singapore ; | Hackensack, N.J. : World Scientific Pub. Co., 2008 . 1 online resource. , Section 1. Aging and degradation. Stator insulation quality assessment for high voltage motors based on probability distribution / H. D. Kim and C. H. Kim. Effect of leakage on deterioration of concrete lining in conventional tunnel / H. S. Jung ... [et al.]. Sulfate attack of shotcrete made with alkali-free accelerator / S. T. Lee ... [et al]. Non-destructive assessment for degradation of 9 Cr steel / J. S. Park ... [et al]. Fretting wear of Inconel 690 tubes tested by piezo-actuated rig / I. S. Chung, M. H. Lee and Y. S. Chai. Assessment of creep damage on a pipe bend of 1/2Cr1/2Mo1/4V Steel / J. S. Hyun. Detection of oil-paper insulation aging with dielectric spectroscopy in time and frequency domain measurements / S. H. Lee, J. H. Kim and S. O. Han. Temperature dependence of return voltage characteristics / S. H. Lee ... [et al.]. Finite element analysis to evaluate wall thinned pipe using PVDF comb transducer / B. M. Song, J. H. Lee and D. H. Lee. | Properties of shotcrete immersed in various harmful solutions / D. G. Kim | Section 2. Bio & medical NDE. A morphological study in the mandibular second premolar using a micro-CT / K. J. Chun, O. S. Yoo and Y. Y. Won. Biomechanical nondestructive evaluation of joint movements and muscle length of lower limbs during hemiplegic walking / S. J. Hwang. Fault diagnosis based on voxel data obtained from CT / J. C. Han, H. B. Youn and H. K. Kim. The estimation of knee varus torque by an accelerometer in osteoarthritis patients and healthy adults / S. H. Hwang, S. B. Park and Y. H. Kim. Development of the health age formular and examination for women / J. H. Shin. Reconstruction of images of speed of sound from medical ultrasound images / M. K. Jeong ... [et al.]. Measurement and evaluation of impulse force which human body receives by contact of machine and structure / Y. Itoh ... [et al.]. Evaluation of hand function recovery in chronic hemiparetic patients using electromyographic responses / K. S. Tae, S. J. Song and Y. H. Kim. | Balance recovery mechanisms against the forward perturbation / S. J. Hwang ... [et al.]. EMG pattern recognition using neural networks during the postural balance control of human body / H. K. Choi, J. H. Jeong and W. H. Cho. Passive elastic characteristics and musculoskeletal kinematics of human foot for biomechanical analysis / H. K. Choi, S. Y. Kim and W. H. Cho. EMG analysis of muscular fatigue and muscle activity due to turtle neck syndrome / W. H. Cho ... [et al.]. The relationship among the center of pressure, the center of mass and the horizontal acceleration of the body in postural sway, falling and walking / H. S. Choi and Y. H. Kim. Joint moments and lumbar curvatures during symmetrical lifting / S. H. Hwang ... [et al.]. Determination of the material property for the rear fixation device of the vertebrae by FEM / D. J. Oh ... [et al.]. A FES sensor system using a tilt sensor for improving hemiplegic gait / S. W. Park ... [et al.]. | Homogeneiyt and ranklet based mass-type cancer detection in dense mammographic images / W. H. Kim and S. M. Kim. The evaluation of usefulness of the FEA and relationship between trabecular microstructural and biomechanical properties in human femoral / M. H. Baek ... [et al.]. Evaluation algorithm based on automatic image analysis for malarial blood cell images / C. H. Kim, J. Y. Kim and S. H. Hong. A study on the performance of 3D acoustic field analysis method for the evaluation of medical ultrasonic probe / W. J. Yu. Measurement of shaking for the sacral-region circumference skin under state of decubitus / T. Nemoto ... [et al.]. Mechanical properties of the human carotid artery using ultrasonography and presumption of arteriosclerosis / T. Nemoto ... [et al.] | A study on the light-weight thin-walled member for optimum crashworthiness design / K. S. Lee ... [et al]. Influence of stacking condition on axial compression and bending collapse of hybrid hat shaped member / J. H. Kim ... [et al.]. A study on the drilling characteristics according to drill diameter of laminate composite / S. C. Lee ... [et al.] | Section 4. Fatigue and fracture. Effect of wear to the fatigue life of shaft based on product lifecycle management / Y. T. Li, Y. B. Wei and M. Song. Compressive fatigue stength of al-alloy foam with different thicknesses / M. Hossain ... [et al.]. Study of experimental examination on strength evaluation in the design of double column for / S. Sasaki, K. Hagiwara and T. Ezumi. Evaluation of fracture toughness of interfacial cracks subjected to mechanical and thermal load using finite element method / D. Mishra ... [et al.]. High-velocity impact characteristic of CFRP composite / R. Kubota ... [et al.]. Wear amount prediction of automobile tire by finite element analysis / J. H. Lee, J. R. Cho, J. H. Choi. Transformed solution for fixed specimen with notches by infinitely similar element method / Y. T. Li, W. Y. Jin and C. F. Yan. Stress analysis on discontinuous finite-width plate by hybrid method / L. Chen and T. H. Baek. | Fatigue analysis of the cervical plate system installed in cervical spine using finite element method / I. C. Yang, S. M. Kim and S. Y. Cho. Durability analysis of rubber diaphragm for vehicle suspension damper system / S. K. Koh, T. H. Baek and H. Y. Hwang. Failure assessment analysis to API 5l X65 pipeline subjected to large plastic deformation / J. H. Baek ... [et al.]. Fatigue crack growth behavior for welded joint of X80 pipeline steel / Y. P. Kim ... [et al.]. An analysis for fatigue behavior of the brazed joints / H. J. Shim, K. W. Kang, J. K. Kim. Evaluation of fatigue strength of the bogie frame for electrical multiple unit / S. C. Yoon and J. G. Kim. An evaluation of residual stress redistribution caused by fatigue crack propagation by finite element method / E. J. Park, E. J. Kim and S. H. Yoo. Fatigue strength analysis of the web plate of wheels using critical plane approach / J. W. Seo, S. J. Kwon and S. T. Kwon. | Fatigue behavior of inconel alloys due to fretting and high temperature / S. W. Woo ... [et al.]. Influence of the damaged blade of a multiple-stage axial compressor on turbine components of the heavy-duty gas turbine / M. S. Kang ... [et al.]. Influence of stress and excitation size on the velocity of compression wavefront in jointed rock masses / M. S. Cha ... [et al.]. X-ray diffraction analysis on fatigue fracture surface of SG365 steel / M. B. Lim ... [et al.]. The study of evaluation tensile characteristics and plane strain fracture toughness in induction surface hardened of the SM53C steel / H. B. Jeon, S. C. Huh and W. J. Park. Fracture characteristrics of ceramic plates using shock tunnel / K. J Kim ... [et al.]. An evaluation of fracture toughness for ceramics / K. J. Kim ... [et al.]. Fatigue life of compound cylinder combining autofrettage and shrink fit due to the firing / Y. S. Lee ... [et al.]. | Fatigue life evaluation of pipe welds in power plant using advanced nondestructive methods / S. G. Lee ... [et al.]. A study on accelerated life test utilizing fatigue damage theory for automobile components / D. H. Jung ... [et al.]. Comparison of fatigue properties of al alloys for chassis components / C. Y. Kim ... [et. al] | Section 5. Guided wave. Acoustic performance of a magnetostrictive strip sensor for a torsional guided wave / Y. M. Cheong and S. Kim. A study on time domain computer simulation of ultrasonic guided wave mode conversion / Y. H. Cho, Y. K. Choi and N. H. Kim. Signals of magnetostrictive sensors on artificial defect pipes of carbon and stainless steel / D. S. Koo ... [et al.]. Welding zone defect detection usefulness estimation of laser guided lamb wave / K. S. Song and J. Y. Kim. A study of guided ultrasonic wave application for heat exchanger performance improvement / Y. H. Cho, J. H. Jung and J. H. Kim. Study on mode switching algorithm and damage evaluation for efficient and precision SHM using smart sensor / Y. Hong ... [et al.]. Bumper impact perception for pedestrian protection using smart sensor / Y. Hong ... [et al.]. | Section 6. Health monitoring of structure. Wideband radar imaging of concrete specimens for NDT / H. C. Rhim and J. W. Oh. Health monitoring of composite structures based on acoustic wave sensing using fiber optic sensors / B. R. Mattapally, M. R. Bhat and Murthy C. R. L. Application of genetic algorithm and Gauss-Newton method to system identification / Grace S. Wang and Fu-Kuo Huang. A study on remote monitoring and security of control system using IPSEC / H. J. Na ... [et al.]. Health monitoring of steel crane girder using PZT sensors / K. J. Shin. Characterization of crack detection methods using strain mode shapes on plates with various geometry / B. S. Kim and S. H. Yoo. Detection of various damage patterns using impedance measurement and statistical post processing / Y. Hong ... [et al.]. Measurement and monitoring of mechanical loads of large slender structures using distributed fiber optic sensor / J. W. Lee ... [et al.]. | Material characterization of lock late for gas turbine plant / Y. H. Cho ... [et al.]. The precise measurement of steel cable tension in cable stayed bridges by nondestructive magnetic sensor / H. W. Park ... [et al.] | Section 7. Image processing. Visualization of tooth for non destructive evaluation / H. Gao ... [et al.]. Image processing based defect inspection system for pharmaceutical products / H. J. Kim, D. H. Ryu and T. W. Choi. Characterization of self-assembled monolayers by using a near-field microwave microprobe / H. Melikyan ... [et al.]. Image segmentation based on fuzzy MFA / K. D. Ban and Y. K. Chung. Low error and real-time stereo vison algorithm for 3D visual inspection / S. C. Park and H. Jeong. Analysis of the detection of voids of construction joints and shapes of inner cavities in concrete using an ultrasonic pulse velocity method / S. K. Park and D. H. Choi. Radial image processing in the discrete polar coordinate / W. H. Kim, H. J. Kim and S. M. Kim. Nonlinear diffusion equation for image denoising in mixed-Gaussian noise environment / H. I. Hahn and D. H. Ryu. | Study on the fiber orientation of weld line parts during the injection molding of fiber reinforced plastic by image processing / J. W. Kim and D. G. Lee. Real-time face and hand discrimination and 3d position extraction using a stereo vision embedded system / Y. K. Kim ... [et al]. Non-destructive evaluaion of cement-grout by surface electrical resistivty method / M. Farooq ... [et al.]. Efficient clustering based on the image context for the object recognition / E. J. Koh ... [et al.]. The development of displacement measurement system by using CCD camera / H. S. Jeon ... [et al.]. Image restoration by using a Wiener filter designed for digital X-ray imaging systems / S. Y. Lee ... [et al.] | Section 8. IR thermography. Current and future role of medical thermography / J. Y. Park. Experimental design and evaluation of thermographic reference block / W. T. Kim, J. H. Park and K. S. Kang. Detection of defects in lumber using IR thermography / C. D. Eom ... [et al.]. A study on nondestructive evaluation of painted metal by using IR thermography / S. H. Chol, K. S. Song and J. Y. Kim. Fast and reliable detection of superficial intracranial hemorrhage by hand-held device using near-infrared / J. Y. Park, S. D. Kim and D. J. Lim | Section 9. Materials properties. AE characteristics of pre-cracked charpy specimens for the multi-passed weldment for the pressure vessel steel / E. G. Na, H. Kim and S. K. Lee. Deformation of pure magnesium in tensile test investigated by STFT of AE signals / Y. Li and M. Enoki. Dynamic characterization on al-alloy foam damaged By cyclic load / I. H. Kim ... [et al.]. Glucose concentration monitoring using a surface plasmon polariton / A. Babajanyan ... [et al.]. Stiffness and energy loss characteristics during saturating-drying process in low porosity rock / T. M. Oh ... [et al.]. Numerical and experimental studies on cooling patterns of Al-Mg system alloy material during the casting product process / Y. K. Oh, H. S. Yoon and H. D. Yang. Homogenized material properties and mechanical behavior of hybrid functionally graded composites / J. H. Choi and J. R. Cho. Glucose biosensing by using a microwave dielectric resonator / J. C. Kim ... [et al.]. | Influence of fineness of limestone powder on external sulfate attack / H. S. Jung ... [et al.]. Enhancement of detection efficiency for G-type nerve agent simulants based on DBR porous silicon / S. H. Jang ... [et al.]. An analysis for mechanical properties of rubber granule layer of synthetic surfaced track / K. W. Kang ... [et al.]. The measurement of thermal diffusivity for semi-infinite solid using the photothermal displacement method / P. S. Jeon ... [et al.]. A study on the Bauschinger effect of gun barrel high strength steel / W. S. Shim ... [et al.]. The effect of shot peening on the improvement of fatigue strength and fatigue crack characteristics of the aluminum alloys / T. H. Song ... [et al.]. A study on the X-ray diffraction analysis and the fatigue crack growth behavior for the aluminum alloys / M. B. Lim ... [et al.]. A study on laser surface hardening of tool steel using optical pyrometry / Y. T. Yoo and H. J. Shin. | The effect of niobium according to solution annealing and age hardening of high strength steel / B. H. Choi, K. C. Jang and B. K. Choi. A study on the supercooling characteristics of TMA-water clathrate compound as low temperature latent heat storage material / C. O. Kim, N. K. Chung and J. H. Kim. Optical characterization of Sensory Rhodopsin II thin films using a near-field microwave microscope / S. H. Kim ... [et al.]. Date:2008 Availability: No items available: Actions: Add to cart
298. Advanced nondestructive evaluation II   Publication: Singapore ; | Hackensack, N.J. : World Scientific Pub. Co., 2008 . 1 online resource. , Pages numbered: xxvii, 775-1479. | Section 10. Micro sensor and MEMS. Angle effect of micro-scale crosshatch grooved patterns under lubricated sliding contact /Y. H. Chae. Effect of micro-scale dimple size on steel surface under lubricated sliding contact /Y. H. Chae | Section 11. Modeling and simulation. Finite element analysis of laser stitch welded high strength steels for automotive / H. S. Bang ... [et al.]. Evaluating the quality of soil grouting by the SASW method / P. H. Tsai and J. Lai. Stress analysis of mandibular first premolar with finite element models / K. S. Chun ... [et al.]. Cascaded linear-systems analysis of CMOS flat-panel detectors for digital radiography / S. M. Yun ... [et al.]. Numerical analysis on 3-dimensional thermal deformation of automobile tire mold using Al alloy 5000 series material / Y. K. Oh, Y. S. Kim and H. S. Yoon. Modeling of dielectric response of oil-paper insulation systems using return voltage method / S. H. Lee, D. G. Park and S. O. Han. Residual stress analysis and measurement of fuel injection pipe / S. K. Koh and E. G. Na. Numerical analysis and experimental studies on current shunts for clamp on meter / W. W. S. Wijesinghe and Y. T. Park. | System identification of a steel bridge using modal flexibility matrix / K. Y. Koo ... [et al.]. Geometric calibration in CBCT using coordinates-transformed sampling / S. K. Heo, M. K. Cho and H. K. Kim. Inverse analysis of stress-strain distribution from monitored response of structures / H. S. Shin, D. G. Kim and S. H. Baek. Optimal design of an linear motion mechanism / J. S. Lee and E. J. Park. Effects of pulse train characteristics on the through transmission pulsed eddy current signal / Y. K. Shin and D. M. Choi. A study on the critical fracture pressure on the Al2O3 ceramic circular plate under shock impact / Y. S. Lee ... [et al.]. A study on evaluation of shear strength of nature-friendly costal environment block connection / C. H. Kim. Simulation studies for the influence of tomographic parameters on the image quality of digital X-ray tomosynthesis / J. E. Oh ... [et al.]. The characteristics of bilge separation sensor system for improving accuracy / W. S. Che, K. W. | Kim and H. S. Kwon. A study on the evaluation sliding behavior of nature-friendly assembled conduit connection / C. H. Kim. Design and simulation of roll forming process for under rail / S. H. Jeong, S. H. Lee and G. H. Kim. Possible effects of FSW tool pin configuration on residual stress distribution / Y. G. Kweon ... [et al.]. Design and characterization of MR damper / H. L. Kim ... [et al.]. Time reversal reconstruction of dispersive ultrasonic lamb waves in thin plates / H. J. Jeong | Section 12. NDE for biosystem and agriculture. Investigation of rice taste elements at wide area, using remote sensing and GIS technology / T. Ueda ... [et al.]. Line-scan spectral imaging system for online poultry carcass inspection / K. Chao, C. C. Yang and M. S. Kim. Bending strength prediction of structural lumber by X-ray scanner / J. K. Oh ... [et al.]. Field application of the ultrasonic CT technique for evaluating deterioration in ancient wooden building / S. J. Lee, K. M. Kim and J. J. Lee. Estimation of optimal plucking time of green-tea using canopy reflectance / T. Kurimoto ... [et al.]. Sampling and calibration requirements for soil property estimation using NIR spectroscopy / K. S. Lee ... [et al.]. Detection of bone and cartilage of beef using magnetic resonance imaging / S. M. Kim ... [et al.]. Realtime monitoring of tomato concentrate processing using RF sensors / S. M. Kim ... [et al.]. Cataloging of olive accessions using magnetic resonance technique / S. M. | Kim ... [et al.]. Quantitative evaluation of knot in Japanese larch lumber using X-ray scanning / J. K. Oh ... [et al.]. Estimation of nitrogen content of rice using hypersepcetral remote sensing / C. S. Ryu, M. Suguri and M. Umeda. Estimation of quality and quantaty of green-tea by hyperspectral image / M. Suguri, C. S. Ryu and M. Umeda. Detection of fecal residue on poultry carcasses by laser induced fluorescence imaging / B. K. Cho ... [et al.]. Detection of pathogenic salmonella in milk by using an impedance biosensor / G. Y. Kim ... [et al.] | Section 13. NDE in electronic industry. Self-layer subtractive digital tomosynthesis / M. K. Cho, S. K. Heo and H. K. Kim. Study for blade ceramic coating delamination detection for gas turbine / C. J. Choi ... [et al.]. Tomography image nondestructive measurement for melt polymer morphology / L. Lifu. Nondestructive characteristics of 1080 and 5083 aluminum alloy by ECAP / K. W. Nam ... [et al.]. Characteristics of laser transformation hardening for rod-shaped medium carbon steel(SM45C) by Gaussian beam / J. D. Kim, J. S. Oh and W. J. Kang. A study on the weldability of aluminized steel sheet by Nd:YAG laser / J. D. Kim, M. H. Lee and J. H. Lee. Monitoring of [symbol] hydrate formation in sediments using compressional wave velocity / T. H. Kwon ... [et al.]. Formation mechanisms of weld defects and dynamic behavior of keyhole in galvanized steel welding by [symbol] laser / J. D. Kim and H. J. Park | Section 14. NDT for infrastructure. The development and application of a new elastic-wave-based scanning system for imaging defects inside concrete structures / J. H. Tong ... [et al.]. Spectral energy transmission method for crack depth estimation in concrete / J. Y. Min ... [et al.]. Development of landslide early detection system using microwave / H. C. Rhim and L. H. Jin. Feasibility of evaluating the compaction quality of soils by the impact echo method / J. Lai, C. Y. Chiu and C. C. Cheng. Color change and residual compressive strength of concrete exposed to high temperature using spectrophotometric method / J. W. Lee, K. H. Choi and K. P. Hong. Identify the locations of concrete cracks with employing the improved active contour model to extract regional boundaries from GPR / Y. Huang and S. C. Hsu. Non-destructive evaluation of asphalt concrete pavement system using FWD tests considering modeling errors / J. H. Yi ... [et al.]. | Nondestructive identification of fatigue cracking in a composite actuator with a PZT ceramic during electromechanical cyclic loading / S. C. Woo and N. S. Goo. Estimation of mechanical properties of concrete from the drilling resistance parameters / S. H. Chang ... [et al.]. Implementation of bender elements for measuring stiffness changes of concrete materials due to cracking / Z. O. An ... [et al.]. A framework for nondestructive evaluation methods accounting for uncertainty of model and aging effect of concrete / K. J. Hong and J. S. Kim. A study of the structural internal assessment of concrete slab using the ground penetrating radar exploration / S. U. Hong and Y. S. Cho | Section 15. NDT in nuclear industry. Remote measurement of pipe wall thinning by microwaves / Y. Ju. 3-dimensional quantitative measurement of a geometric anomaly in steam generator tubes using a diagnostic eddy current probe (D-probe) / D. H. Lee ... [et al.]. Methodology for detecting failed fuel assembly in a liquid metal reactor / S. H. Seong ... [et al.]. Development of magnetic phase detection sensor for the steam generator tube in nuclear power plants / D. Son ... [et al.]. Study on a neutron flux detection and its digital signal processing for nuclear reactors / S. Hur ... [et al.]. Development of an underwater UT inspection system for reactor welding areas / Y. R. Choi and J. C. Lee. Development of 3D image processing software for UT-NDE of steam generator of nuclear power plant / M. W. Nam ... [et al.] | Section 16. NDT in power plant. Characteristics of phased array UT crack evaluation with the number of active element and scan angle changes / Y. S. Cho and J. H. Kim. Development of water absorption test equipment for generator stator windings in power plant / Y. C. Bae, H. S. Kim and D. Y. Lee. Assessment of fluid leak for power plant valve using Pb-free acoustic emission sensor / S. G. Lee and S. K. Park. Leak diagnosis of control valves for power plants using multi-measuring methods / S. G. Lee, J. H. Park and Y. B. Kim. Effects of magnetic phase on the ECT signal in the SG tubes / D. G. Park ... [et al.]. SG eddy current issues updates in Korea / S. J. Kim ... [et al.]. Application of digital radiography inspection for pipe weldments in the power plants / S. K. Park ... [et al.]. Evaluation of residual stress for boiler welds in thermal power plant by nondestructive method / K. B. Yoo and J. H. Kim. | Section 20. Optical method. A study on the analysis of O-ring under uniform squeeze rate and internal pressure by photoelastic experimental hybrid method / O. S. Kwon ... [et al.]. Quantitative magnetic imaging using magneto-optical method / T. Ishibashi and K. Sato. Measurement of modulation transfer function of an optical system by using skew ray tracing / T. T. Liao, J. F. Lin and C. H. Lu. Digital speckle pattern interferometer to measure the deformation distributions of a tensile specimen / S. K. Park ... [et al.]. | Measurement of the concentration of glucose by a circular polariscope with electro-optic modulation / J. F. Lin, T. T. Liao and C. C. Chang. Fabrication and characterization of prismatic band filter gradient rugate porous silicon / J. H. Kim ... [et al.]. Analysis of chemically induced residual stress in polymeric thin film using curvature measurement method / S. S. Lee, I. W. Jeon and M. H. Yi | Section 21. Railways. Fatigue life evaluation for the floor system of a steel railway bridge / D. H. Choi ... [et al.]. Stress intensity factor calculation on critical points of railway bogie frame / H. K. Jun. A study on partial side wears for the brake system of railway vehicles / J. H. Song ... [et al.]. Sensitivity for internal and surface defects of railway wheel using induced current focusing potential drop / S. J. Kwon, D. H. Lee and J. W. Seo. The effect of the evolution of contact surface profile on fatigue crack nucleation site in press-fitted shaft / D. H. Lee ... [et al.]. The influences of the wheel profiles on the wheel wear and vibrational characteristics of the passenger cars running on the Kyeongbu line / C. W. Lee and J. C. Kim. Evaluation of strength for bogie frame of railway freight car through finite element analysis / Y. S. Ham. Measurement of the lateral displacement of the wheel-rail based on the vision sensor / M. S. Kim and W. H. You | Section 22. Reliabilty. Reliability analysis of static bearing capacity evaluation of driven steel pipe piles using MCS / J. H. Park ... [et al.]. Safety assessment of subway rolling stocks using nondestructive evalaution and engineering analysis techniques / J. G. Kim ... [et al]. Failure analysis of integrated circuits based on nondestructive evaluation / H. J. Kim, K. H. Um and S. J. Shin. An analysis of the main effect factors of brush wear for automotive blower motors / W. G. Shin, S. H. Lee and Y. S. Song. Design & reliability of an optimal structure using neural network / J. S. Lee. Comparison of the mechanical properties of laser and arc welded 9Cr-1Mo steel / C. I. Oh ...[et al.]. Artificial neural network (ANN)-based reliability analysis of a fiber reinforced polymer (FRP) Deck / D. H. Kim, D. K. Kim and J. Cui. Mechanical characteristics of hybrid welded joints of Galvalume steel / Y. H. Kim ... [et al.]. Date:2008 Availability: No items available: Actions: Add to cart
299. Proceedings of the first Regional Conference on Magnetic and Superconducting Materials   Publication: Singapore ; | River Edge, NJ : World Scientific, 2000 . 1 online resource (2 v. (xxvii, 1,144 p.)) : Date:2000 Availability: No items available: Actions: Add to cart No cover image available No cover image available
300. Proceedings of the 7th International Conference on Electro-Rheological Fluids and Magneto-Rheological Suspensions   Publication: Singapore ; | River Edge, N.J. : World Scientific, 2000 . 1 online resource (xiv, 848 p.) : Date:2000 Availability: No items available: Actions: Add to cart